- On sale!
Core drill system RODIACUT 250 / RODIADRILL 500
RODIACUT 250 drill stand with combination drill mounting plate and RODIADRILL 500 drill motor for drilling Ø 32 - 250 mm.
Installers, service technicians or electricians can use the hand-operated and stationary core drilling system to easily produce common core drillings.
Stationary dry drilling in reinforced concrete: Ø 32 - 250 mm
Stationary dry drilling in masonry: Ø 32 - 250 mm
Just one tool for all settings on the drill required
Many additional functions integrated on the drill stand, such as drill depth stop, borehole center indicator, angle adjustment of 15°, 30° and 45°, dowel or vacuum mounting possible, spirit level for horizontal or vertical alignment.
Secure payment by PayPal, credit card or bank transfer
Fast and convenient delivery by Correos and Correos Express
If you are not 100% satisfied we will refund your money
|Threaded adaptor:||G 1/2” and 1.1/4” UNC|
|Power input:||4,000 W|
|Power output:/td>||3,000 W|
|Nominal speed 1 gear:||600 rpm|
|Nominal speed 2 gear:||1,250 rpm|
|Nominal speed 3 gear:||3,200 rpm|
|Torque 1 gear:||185 Nm|
|Torque 2 gear:||107 Nm|
|Torque 3 gear:||55 Nm|
|Drill motor adaptor:||Quick-change recording via dovetail plate|
|Voltage:||230 V 50 Hz|
|Drilling range:||without water collection ring max. Ø 250 mm|
|with water collection ring max. Ø 225 mm|
|Drill motor adaptor:||Clamping neck Ø 60 mm and quick change recording via dovetail plate|
|L x W x H:||260 x 510 x 980 mm|